XLY-807 Brushless metal shears
Brushless metal shears with two 4.0 Ah batteries and a case, supplied with a hex key. They cut straight lines and curves in roofing sheet, ductwork and thin metal.
- Voltage platform
- 21 V max
- Battery configuration
- 2 × 4.0 Ah
- Bare-tool weight
- 1.286 kg
Complete kit supplied: 2 batteries and 1 charger, 6 units per carton.
360° view
Hold the image and drag left or right to see every side of the tool; on a phone, swipe with your finger.
Tool details
Select a numbered point on the image or hover over an item below.
- 1
Metal cutting head
Straight and curved cuts and trimming in sheet metal; cut edges stay flat without curling, so the sheet is easy to fold and fit afterwards.
- 2
Trigger
Pull the trigger to cut; the work light shows the cut line.
- 3
Rubberised grip
Rubber overmould and anti-slip texture give a secure hold even with oily hands or gloves, for better control.
- 4
21 V battery and fuel gauge
The battery locks as it slides in; press the gauge to see how much charge is left. All four batteries, 2.0 to 8.0 Ah, fit every 21 V LEIYU tool.
- 5
Rotating cutting head
The cutting head turns, so you can follow curves without twisting your hand.
- 6
Switch lock
When not in use, the switch locks the trigger, so the tool will not start by accident when you put it down.
Product highlights
- Brushless motor
- A brushless motor has no carbon brushes to replace and gets more work out of each battery charge.
- Compatible with the 21 V platform
- 2.0 to 8.0 Ah batteries interchange across all LEIYU 21 V tools.
- Two batteries and one charger
- Comes with two batteries and a charger.
- Sheet metal
- Cuts straight lines and curves for roofing, ductwork and sheet-metal fabrication.
- High power-density brushless motor
- Pure copper windings, N45SH high-temperature magnets and FOC vector control. Motor ratings are never overstated: what the rating plate says is what you get.
- Aluminium-alloy gearbox
- Gears in 20CrMnTi alloy steel, carburised and hardened, installed in a gearbox with an aluminium-alloy housing.
- Split housing
- The housing is made in separate parts, so a repair replaces only the damaged part, not the whole body.
- Overload protection
- The tool stops automatically if it jams or runs at full load for too long, protecting the motor and battery.
Who it is for and how to choose
The XLY-807 is a cordless metal shear for roofing sheet, ducts and thin sheet metal. It cuts straight lines and curves with clean, flat edges. Roofing, duct and sheet metal crews use it.
Cordless metal shears for cutting roofing sheet, ductwork and thin metal sheet; a model for stores supplying roofing, ductwork and sheet metal crews.
Compared with hand snips, the cut edge is flat and does not curl, so it is easy to fold and fit afterwards; two 4.0 Ah batteries, a case and a hex key are included.
Technical specifications
Dimension drawings, certification documents or nameplate photos are available per model and can be sent with the quote.
Performance
- Model
- XLY-807
- Type
- Brushless metal shears
- Motor
- Brushless motor
Batteries and weight
- Voltage platform
- 21 V max, compatible with 2.0 to 8.0 Ah batteries
- Battery configuration
- 2 × 4.0 Ah
- Charger
- 1 piece
- Battery and charger warranty
- 1 year
- Other parts
- Replacement parts sent for defects
- Bare-tool weight
- 1.286 kg
- Complete kit weight
- 3.655 kg
Packaging
- Units per carton
- 6 units/carton
Standard configuration
- 1 ×Brushless metal shears XLY-807
- 2 ×21 V 4.0 Ah lithium battery
- 1 ×Charger
- 1 ×Tool case
- 1 ×Hex key
- Manual and warranty card
Downloads
How to choose models, fill cartons and ask for a quote on a first order: Central Asia wholesale cordless tool purchasing guide
Frequently asked questions
Can the XLY-807 cut curves?
Yes. The cutting head turns, so it follows both straight and curved lines.
What is included as standard?
1 tool, 2 × 4.0 Ah batteries and 1 charger. See Standard configuration above for the full list.
Can batteries be used with other LEIYU tools?
Yes. All four capacities, 2.0, 4.0, 6.0 and 8.0 Ah, fit every LEIYU 21 V tool; a small pack is lighter for light work, a large one lasts longer on heavy work. The mount is the Dayi A3 type common in China.
How many tools are packed per carton? Can models be mixed?
6 units per carton, with a minimum order of one carton. Mixed models are available for the first order. List the models you need in your enquiry and we will confirm and quote.
How long is the warranty?
Batteries and chargers have a 1-year warranty; if other parts of the tool are defective, we send replacement parts. The contract sets the final terms.
Which documents come with this model?
UN38.3 and MSDS documents are checked per model and sent with the quotation; the tool, battery and charger may have separate documents.
How do I request a quotation?
Press "Add to enquiry" to put the model on your list, add the battery option, quantity and delivery city and submit, or message us on WhatsApp. The quote states unit price, carton quantity, lead time, payment terms and available documents.
